Exhaust tip recommendations?
#1
Senior Member
Thread Starter
Exhaust tip recommendations?
I'm looking to replace my exhaust tip, but can't seem to find exactly what I'm looking for. I'm looking for a stainless dual exhaust tip (3" inlet for factory exhaust) that will bolt on (no welding). Preferably black, but that's not a deal breaker as it can always just be painted. So far haven't found anything, but my knowledge of exhaust tips and where to look for them is pretty limited, so hoping someone can steer me in the right direction. Any suggestions?
#4
Official HTT Greeter
finding black SS might be difficult. It seems if it's SS then it's polished and if it's black then it's just anodized.
maybe look at some of the big carriers. Jegs, Summit, JCWhitney, etc.
Edit: Summit has several with 3" in and dual 4" out. Polished stainless.
maybe look at some of the big carriers. Jegs, Summit, JCWhitney, etc.
Edit: Summit has several with 3" in and dual 4" out. Polished stainless.
Last edited by SixShooter14; 12-07-2016 at 10:20 AM.
#5
Senior Member
Thread Starter
I guess SS isn't absolutely necessary. I live in Canada and it is road salt season so I thought SS might wear better. I'll check those out, thanks for the suggestions.
#6
Official HTT Greeter
Or get the cheapest you can find and replace it every year or 2
#7
Senior Member
Thread Starter
Yep, stainless painted is what I was thinking. Now just need to find one the correct inlet size (and length) that just bolts up. I'd even consider just rattle canning it with a good quality high temp matte black paint.
Trending Topics
#8
Official HTT Greeter
something else to consider. a local shop could weld a flange to a weld-on type tip.
I was looking for a tip for my old truck. It has a V6 but I didn't want the bumblebee sound. So I got a SS 2.5" inlet and a 4" out 24"L all I could find were weld-on tip from ebay. Then had a local muffler shop weld a flange to it so that I could bolt it in place. $35 for the tip and $15 for the flange.
I was looking for a tip for my old truck. It has a V6 but I didn't want the bumblebee sound. So I got a SS 2.5" inlet and a 4" out 24"L all I could find were weld-on tip from ebay. Then had a local muffler shop weld a flange to it so that I could bolt it in place. $35 for the tip and $15 for the flange.