If anyone is interested in doing the VTA mod see here:
https://www.f150forum.com/f122/fs-bo...ta-mod-317881/

The first one is sold but of there is enough interest I will make more.

 

Made some more plugs, these ones have a little more unnecessary "bling" to em

 

Can you find out about the 2.7?

 

I just checked Tasca, the part number for the blow off valve is the same for the 3.5 & 2.7, so yes it will work for the 2.7

 

Any videos from outside the truck?

 

Here is one with the truck parked, in drive while holding down the brakes. This is only at very low boost, my Xcal 3 showed a max of .87psi. A stock truck will get up to around 16psi. It is very loud outside of the truck at higher boost, can probably be heard 100yds away. It is entirely controllable though, the more aggressive you drive the louder it will be. Being civil and slowly easing off the throttle, you can tone it down to nothing, but that's no fun

 

Going fast, 2 left at this point. I'll have to scrounge around the shop to see what else I can find for material to knock some more out

 

What exactly is the purpose of doing that?

 

The same reason most people put aftermarket exhausts on, attention! You wouldn't believe the "head turn" effect of this mod!

 

pm sent