DIY- Mini H1 7.0 Projector Retrofit
#151
Honestly the tube look bad, I have seen a few on google. There is room but it looks cheap to me.
#152
Senior Member
iTrader: (1)
Although I don't have a good picture I added morimoto XSB strips in mine. One 24inch and one 16 inch. Light output is great. But because of the design of the strips it is hard to get them to hold to the contour of the headlight without lifting. I attempted to used 3m double sided tape and press the led strip into the tape to hold the contour but in some places where you come to a compound corner the strip doesn't want to flex freely. I can get some more close up light off pics if anyone wants but here is one I got on my phone.
#153
Although I don't have a good picture I added morimoto XSB strips in mine. One 24inch and one 16 inch. Light output is great. But because of the design of the strips it is hard to get them to hold to the contour of the headlight without lifting. I attempted to used 3m double sided tape and press the led strip into the tape to hold the contour but in some places where you come to a compound corner the strip doesn't want to flex freely. I can get some more close up light off pics if anyone wants but here is one I got on my phone.
The following users liked this post:
white_dc (11-30-2016)
#156
BAMF Club
^ real quads? Which projectors did you use?
#158
#159