mike5809

So have the updates started to roll out? I am still on v1.0 and haven't seen any messages on my truck about updating.

Does the car have to be in park for Wi-Fi to be active and update?

tbinmd

No updates yet. Ford says by the end of the month. We shall see.

Ecoboost Oz

I have a 2016 XLT 302A packaged vehicle that I just bought roughly three weeks ago. Basically I need to wait for this new update before I can use Apple CarPlay? If so, it's also my understanding that I will have to change out the USB ports under the radio as well?

If so, what all will be involved in doing that?

Aashu

go back page 1 and start reading. In short, a 3 week old truck should have v2 already, just change usb hub for carplay to work. Android should be fine as is since it can use BT connectivity.

Tat2dcoyote

Just because he bought his truck three weeks ago doesn't mean he has v2, it all depends on when his truck was built. I also bought my truck 3 weeks ago and I have v1.

Ecoboost Oz

Yeah, I'm 99% sure my truck doesn't have the v2.0 version. My truck was sitting on the dealership lot for quite some time.

tbinmd

trucks were showing up in July with the update. It's easy to check your version, on the Sync3 unit, goto settings, then general and down towards the bottom of the page it about. That will show you the version of the system. You will also want to sign up on owner.ford.com, that will also show the sync version and when it was installed.

Husker

iTrader: (4)

Here is what Ford Owner Site has on my 2017:

Date Confirmed: Nov 8, 2016

Version: SYNC3 v2.0

HB5T-14G381-AJ

The new version contains the following updates:
Updated voice recognition engine.
Bluetooth phone, media, and Wi-Fi improvements.
Navigation user interface improvements (if equipped).
Android Auto for supported devices.
Apple CarPlay for supported devices with hardware upgrade.

tbinmd

You have a 2017, so you are CarPlay ready now. You shouldn't need the new hub. Since the 17's were shipped as CarPlay enabled.

wishiwas

Edited