Console duct
Thread Starter
Senior Member
Joined: Feb 2016
Posts: 459
Likes: 101
From: Norfolk, VA /Middleburg, FL
Console duct
For those of you that installed a console with ducting, what screws do you use to mount the main duct to the HVAC system? The 420C piece in the pic. Can't find it on any of the parts breakdown. Thanks in advance.
Last edited by D. Reid; Dec 16, 2016 at 10:23 PM.
Senior Member
Joined: May 2016
Posts: 521
Likes: 115
The mounting screws for the elbow vent are the same screws that all the other ducts use.
Just look at the other ducts and most of them have a screw holding them together.
Those same screws fit into the mounting positions. So, same size screws.
Don't know the part # for the screws sorry.
Just look at the other ducts and most of them have a screw holding them together.
Those same screws fit into the mounting positions. So, same size screws.
Don't know the part # for the screws sorry.
Thread Starter
Senior Member
Joined: Feb 2016
Posts: 459
Likes: 101
From: Norfolk, VA /Middleburg, FL
The mounting screws for the elbow vent are the same screws that all the other ducts use.
Just look at the other ducts and most of them have a screw holding them together.
Those same screws fit into the mounting positions. So, same size screws.
Don't know the part # for the screws sorry.
Just look at the other ducts and most of them have a screw holding them together.
Those same screws fit into the mounting positions. So, same size screws.
Don't know the part # for the screws sorry.