Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by: Worksport

Compass Quit Workig

Thread Tools
 
Search this Thread
 
Old Mar 27, 2023 | 12:29 PM
  #1  
Treasurer's Avatar
Thread Starter
Member
 
Joined: Sep 2019
Posts: 48
Likes: 6
From: Eastern Canada
Default Compass Quit Workig

The compass on my 2020 F150 quit working but everything else on the touch screen is still functioning. Does anybody else who experienced this problem know if it is easy or difficult to fix? I really don’t have much - if any, need for the compass but the truck is still under full warranty. However, I’m not sure whether I would want the dealer’s service technicians removing the screen or disassembling part of the dash.
Reply
Old Mar 27, 2023 | 12:49 PM
  #2  
52merc's Avatar
5 Year Member
5 Year Member
Community Builder
Liked
Loved
 
Joined: Nov 2018
Posts: 6,724
Likes: 3,946
From: Calgary, Alberta
Default

Could be an IPC, GWM, APIM, or HS3-CAN bus issue. Pinpoint tests say to perform self-tests on those three modules.

From the WSM:

Compass (With Touchscreen Audio)

On the base and mid-level IPC, the compass is displayed as a 1 or 2 character display in the message center that indicates the current direction of the vehicle (N, NE, E, SE, S, SW, W, or NW). On the high-level IPC, the compass can be displayed as a virtual compass along with the 1 or 2 character display. The IPC receives the compass direction message from the GWM over the HS3-CAN. The GWM receives the compass direction message from the APIM over the HS3-CAN.
Reply
Old Mar 27, 2023 | 06:14 PM
  #3  
Home2#7's Avatar
Senior Member
Liked
Loved
Community Favorite
 
Joined: Oct 2021
Posts: 707
Likes: 231
From: AL
Default

52merc - The your post #2 is info for "IPC" messenger center. Treasurer is asking about the touchscreen display (I think?). But a question about "Does the compass show up in the IPC? " help.

Last edited by Home2#7; Mar 27, 2023 at 06:14 PM. Reason: spelling
Reply
Old Mar 27, 2023 | 06:36 PM
  #4  
52merc's Avatar
5 Year Member
5 Year Member
Community Builder
Liked
Loved
 
Joined: Nov 2018
Posts: 6,724
Likes: 3,946
From: Calgary, Alberta
Default

Originally Posted by Home2#7
52merc - The your post #2 is info for "IPC" messenger center. Treasurer is asking about the touchscreen display (I think?). But a question about "Does the compass show up in the IPC? " help.
Yes the compass can show up on the IPC. Trip/Fuel => Navigation - with no route set the compass shows up.

The travel direction (N, NE, E, SE, S, etc.) is shown on many of the other IPC screens. I use the digital speedometer screen a lot and it shows up there.

Last edited by 52merc; Mar 27, 2023 at 07:03 PM.
Reply
Old Mar 27, 2023 | 07:04 PM
  #5  
52merc's Avatar
5 Year Member
5 Year Member
Community Builder
Liked
Loved
 
Joined: Nov 2018
Posts: 6,724
Likes: 3,946
From: Calgary, Alberta
Default

More from the WSM:

If the compass direction message is missing or invalid for 5 seconds or less, the compass displays the last vehicle direction based upon the last known good compass display message received. If the compass direction message is invalid or missing for more than 5 seconds, the IPC defaults the display to all dashes (---).

Possible Sources
  • Communication concern
  • GPSM
  • GWM concern
  • IPC
GPSM

The GPS antenna integral to the GPSM is used to acquire the compass heading. The compass heading is sent over
the CAN to be displayed on the centerstack infotainment display.

The GPSM provides vehicle location information for identifying the vehicle location in the event of a collision.

The GPSM requires PMI when it is replaced.
Reply
Old Jun 27, 2023 | 08:55 AM
  #6  
Treasurer's Avatar
Thread Starter
Member
 
Joined: Sep 2019
Posts: 48
Likes: 6
From: Eastern Canada
Default

Dealer fixed my compass by replacing the antenna on the roof. That also fixed the issue of clock not keeping the correct time when on ACC.
Reply




All times are GMT -4. The time now is 08:36 AM.