Combined Sensor Module?
Combined Sensor Module?
I have a 2016 F-150 CC FX4 XLT and am installing Sync Connect. While I was messing with connector C2280c in the BCM, I was going to do the intrusion sensors as well. Pin #16 for Sync Connect was not populated but Pin #15 which the intrusion sensors use was populated by 2 yellow with a green stripe wires. So, I looked at the manual and it said it was for fuse #11 or Circuit Breaker. Looked at fuse #11 and it says it is for the Combined Sensor Module. Never heard of this module and was wondering if it is known by another name or what that module does? Only unique things I have are PTBA and the integrated trailer brake.
Last edited by dpuc10; Dec 20, 2020 at 06:03 PM.
5 Year Member
Joined: Nov 2018
Posts: 6,714
Likes: 3,933
From: Calgary, Alberta
I have a 2016 F-150 CC FX4 XLT and am installing Sync Connect. While I was messing with connector C2280c in the BCM, I was going to do the intrusion sensors as well. Pin #16 for Sync Connect was not populated but Pin #15 which the intrusion sensors use was populated by 2 yellow with a green stripe wires. So, I looked at the manual and it said it was for fuse #11 or Circuit Breaker. Looked at fuse #11 and it says it is for the Combined Sensor Module. Never heard of this module and was wondering if it is known by another name or what that module does? Only unique things I have are PTBA and the integrated trailer brake.
C2280C Pin-14 has two YE-GN wires and connect to the Battery Saver Relay.. Are you sure you have the pin numbers correct?
Turns out I couldn't count and missed a pin. 15 and 16 were open and all is good. Thanks