Hey guys,

I recently lifted my truck and I have been trying to adjust my headlights down as they are pointing to the sky. I have tried every screw driver to get these things to move down but nothing is happening. Anyone have a similar issue?

 

one phillips screwdriver is all you need. right up top, under the hood

 

#2 or #3 Philips screwdriver. It moves freely, so it may not feel like you're doing anything, but you are. Just follow the recommended procedure and you'll see the beam move up and down as you turn the driver.

 

When I adjusted my headlights down, I used a Phillips screwdriver, and it felt like the plastic screw was slipping. However, looking at the light pattern on the wall ahead of the truck. The lights were going down. The screw really turned hard.

 

If you don't have a large Phillips, a flathead will work, but only if its your last resort.

Are you putting a piece of tape as a reference just to know exactly??
Sorry I'm asking, but someone will.