......

 

Oh, okay that could changes things then. I'm not really sure. Perhaps you could get away with only changing the glass? I would see if you could get a hold of the parts catalog so you know if it's possible to just order the new mirror glass (s) with BLISS

 

......

 

Got mine all wired up and can only see 1 Bliss Module in Forscan. Any ideas what to look for?

 

......

 

......

 

I upgraded the BLIS glass only on my stock STX mirrors. Glass comes with LED and heated element. Mine also only had the 8 pin connector so I upgraded to 22 pin connector as well. I had to buy the LED connector and Heater element connectors as well as the pins for them, but ultimately did the conversion without issues. This is a little more advanced way to get BLIS working, but it is cheaper than replacing the entire mirror assembly if you have the time, equipment, and skill set.

I also converted my existing door harness from 8 pin to 22 pin myself and saved money there. Just had to add the missing wires to the new 22 pin connector.

 

......

 

Mine was using all OEM parts. I posted this information already somewhere. I’ll have to find the post where I did this…

The glass just pops off and you basically add the missing wires that get populated to the empty pins on the 22 pin connector. It’s pretty straight forward, but like I said, not for everyone if you’ve never modified harnesses before. Not cutting involved. Just “plug and play” parts/wires.

 

.....