As built data for 2015 Lariat
Thread Starter
Junior Member
Joined: Apr 2017
Posts: 9
Likes: 0
From: Missouri
As built data for 2015 Lariat
I am looking for the as built data (codes) for a 2015 lariat with all the functions for tow mirrors. I have a XLT model that I just swapped out the wiring harnesses and put on the power fold/ power extend tow mirrors. I have als put on the new bezel with switches for the spotlights and a new module under the dash. I have the new window switch installed as well. I just need to program it all to get it working.
I hope someone can can point me in the right direction for the codes I need.
I hope someone can can point me in the right direction for the codes I need.
For future searchers: https://www.motorcraftservice.com/AsBuilt Find a vehicle with the options you are looking to add and enter the VIN. Done.
Size Matters
Joined: Aug 2015
Posts: 5,958
Likes: 3,402
Size Matters
Joined: Aug 2015
Posts: 5,958
Likes: 3,402
just fyi - if you use Lariat As Built data for power fold you will end up with a DTC in both door modules as an XLT doesn't have Memory mirrors. You need to use the As Built data from the document I posted.
Last edited by tmcolegr; Sep 9, 2018 at 07:45 PM.
Trending Topics
Size Matters
Joined: Aug 2015
Posts: 5,958
Likes: 3,402
You do realize the XLT cab harness does not support power telescope. Additional wiring must be added to the cab harness. All this is covered in the document I posted.
Thread Starter
Junior Member
Joined: Apr 2017
Posts: 9
Likes: 0
From: Missouri
Power telescope has nothing to do with programming the door modules as this feature is not controlled by the door modules.
You do realize the XLT cab harness does not support power telescope. Additional wiring must be added to the cab harness. All this is covered in the document I posted.
You do realize the XLT cab harness does not support power telescope. Additional wiring must be added to the cab harness. All this is covered in the document I posted.
Lariat (500A, 501A & 502A wo/Technology Package) door harnesses w/22 pin mirror connector, FL3Z-
14630-E and FL3Z-14631-A support power adjust, heat, turn signals, power fold & telescope, memory, auto dimming (driver’s side only), spot lamps, LED security approach lamps and BLIS - Does NOT support Technology Pkg. w/side camera. Driver’s side door harness requires modification (4 terminals must be repinned) of 8 pin connector (C541) to 4 pin connector (C505) for LH front door lock switch without memory. Connectors for exterior front door handle switch (C543 & C634) and interior front door handle ambient lighting (C573 & C649) won’t be use