Best Modifications Under $50 15+
#1671
Oh, yeah, that's happening shortly. As you can see, I started peeling off the sticker but they're individual stickers (which is idiotic) so I stopped out of sheer laziness. Want a new IU or OEF license plate frame, just haven't decided on one yet.
The following users liked this post:
WalterMelons (12-14-2020)
#1672
Dielectrically 5w30
Hmm, never really considered a plate frame before, they're usually dealers, so run without, not sure if i'd like a plain frame or not, never looked what's out there besides educational/dealer/sports team options.
#1673
Senior Member
Can just get a plain color or if you’re cheap like me I’ve just turn the dealer one around it’s plain black on the back side and it looks fine. There’s a crap load on Amazon though.
#1674
I like having either a veteran plate or an operation enduring freedom license plate frame because I've gotten out of 8 tickets lol. Cop walks up, asks my MOS or where I work, says slow down, walks away from vehicle lol.
The following users liked this post:
RickC137 (01-23-2021)
#1675
Senior Member
Wish I could say the same. Thanks for your service.
Last edited by WalterMelons; 12-28-2020 at 03:02 AM.
#1676
Senior Member
I have no plate frame on my truck, and it looks fine. On our Jetta, the plate mount holds the plate about a half inch off the surface of the trunk, so no frame looked really odd. Made the plate look like it was floating. I bought a cheap set off Amazon and they are surprisingly good quality for the price.
The following users liked this post:
[F2C]MaDMaXX (12-14-2020)
#1677
For those that upgrade their SYNC3 to the latest versions (3.4.xxxxx) via Cyanlabs software upgrading program, a new USB hub to eliminate the "USB hubs not supported please remove" message when you first start your truck.
Part number HC3Z-19A387-E for the updated hub. This is also the hub needed for Apple CarPlay from what I've read (I use Android Auto so can't verify). Searching can score you one for $48 which fits with this thread.
Part number HC3Z-19A387-E for the updated hub. This is also the hub needed for Apple CarPlay from what I've read (I use Android Auto so can't verify). Searching can score you one for $48 which fits with this thread.
#1678
For those that upgrade their SYNC3 to the latest versions (3.4.xxxxx) via Cyanlabs software upgrading program, a new USB hub to eliminate the "USB hubs not supported please remove" message when you first start your truck.
Part number HC3Z-19A387-E for the updated hub. This is also the hub needed for Apple CarPlay from what I've read (I use Android Auto so can't verify). Searching can score you one for $48 which fits with this thread.
Part number HC3Z-19A387-E for the updated hub. This is also the hub needed for Apple CarPlay from what I've read (I use Android Auto so can't verify). Searching can score you one for $48 which fits with this thread.
#1679
Unknown if just a number change or actual hardware change. If you aren't getting the "USB hub not supported" message and you've installed the latest version of SYNC3 (currently 3.4.20282), then you're fine.
#1680
Senior Member
I remember when all that information came out on Microfiche films. If you are younger, you'll probably have to google that to know what I'm talking about.