Just did a belltech 2/4 and would like to drop the rear 1 more inch , should I just install the stock rear shackles or put the 1 inch lift block in ?

 

Not sure which kit but if it’s a rear flip kit your oem shackle will lower it too much. A block is your best bet...you can really dial it in exactly how you want it. If you bet an actual 2/5 though it’s gonna be lower in the back than the front.

 

Drive it for a week, let it all settle in. All the BellTech 2/4 on a 13th gen have been perfectly level from what I have seen.

 

Yes i installed a flip kit andas it sits now it's still 1 inch lower in the front, was thinking raising the front 2 inch and lowering the back 1 inch because the front rubs like crazy on my 26x10s and would like the back lower then the front, also my truck is a 4x4