When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I noticed the drivers side rear door B pillar plastic is peeling away from the truck, towards the top. Has anyone had this issue? How do I remedy this?
Lower the window, peel back the weather stripping and take a look at the trim panel. I believe its held on with 3 or 4 8mm screws. At least the front door one was when I installed my door keypad. Might need to loose the screws, press on the trim piece to get it back in place and then tighten the screws back up.
Lower the window, peel back the weather stripping and take a look at the trim panel. I believe its held on with 3 or 4 8mm screws. At least the front door one was when I installed my door keypad. Might need to loose the screws, press on the trim piece to get it back in place and then tighten the screws back up.
I ordered double-sided tape to fix it, but after pushing it in one final time, it stuck and has not popped out since. I guess I'll just wait until it happens again before opening the tape lol...