So i plan on enabling the auto lock in the cluster through forscan, as it's currently not enabled in my cluster. I do have autoUNlock in the cluster, and it's checked. However, if i turn the truck on, then off, and open the drivers door, none of the other doors unlock. Am i doing something wrong? Does the auto lock option have to be present in the cluster for the autounlock to work?

 

From the owner's manuel - Autolock and Autounlock (If Equipped) The autolock feature locks all the doors when your doors are closed, the ignition is on, and your vehicle reaches a speed greater than 12 mph (20 km/h). When your doors autolock while driving, stopping the vehicle then switching the ignition off or to accessory and opening the driver door unlocks all your doors. This autounlock feature remains active for 10minutes after stopping.

Note: The doors do not autounlock if you have electronically locked them before opening the driver door.

 

Ah. Ok. It's weird they would even put the auto unlock in the cluster but not the auto lock.