Ok, I have a 2020 Lariat. I have went into the DDM and PDM and enabled. I selected write..and the don't fold automatically. I have tried a few times. Tried Lincoln mode...nope. They do fold from inside. What is wrong?

 

These are the values that work for my 2019.

 

Kenny

My Forscan s the newer version and
doesn't have codes. It is either enable or disable.

 

FORScan has both. My laptop is charging so I can’t double check. I’m pretty sure I’m running the latest version too. Click run on the as-built line for each module. The “easy” method doesn’t always work for our trucks.

 

So if I go to the as built and update it will be the regular..74XX type with the spreadsheet ?

 

I’m not sure I follow?? Just navigate to the lines shown for each module and update the shown values.

 

Be sure and press "write" and follow the cues from there. Watch this or something similar. Best not to change things until you know the ropes. Lots of easy research on youtube.

 

Don't I just go into the DDM and PDM and enable like I did for the BAMBI mode?

 

No. clearly those default drop down items are not working for you. You need to go into the as-built module section and change the values to the ones I posted above. You’re in the wrong section, still. My laptop is charged…let me grab some screenshots.


still, better yet, go to the first post of the FORScan thread stickied at the top. It has all you’ll ever need to know for basic changes, like this.

 

Just click the As Built line for each module and enter the code I have shown above. Stop clicking on the "module configuration" line. After entering the values I showed in post #2, you'll good to go.