Hello all...My 2015 F-150 5 liter has developed an accelerator problem...it hesitates real bad...I do have codes 2127 and 2128 stored. It says the E circuit. i tested things down at the pedal...I get 5 volts on only one five volts ( green-orange wire) not on the other (blue-gray wire). is there a diagram of the wires at the computer (pinout?) I dont know if I have a broken wire or bad computer...any help thanks!

 

The pedal sends two rising voltage signals to the pcm that serve as a redundancy. They are not matched and have different rates of voltage change. If you're getting nothing out of one of them, it's likely a dead pedal.