Anzo Switchback Problem
Thread Starter
Junior Member
Joined: May 2018
Posts: 2
Likes: 0
From: Las Vegas, NV
Anzo Switchback Problem
I had my DRL’s set to use my Anzo switchbacks and they worked great, it would only run the switch backs and not the headlights. I added hill decent control today and now my switch back on my driver side won’t turn yellow at all and only the small blinker light is working. I have also installed LED headlights and fog lights but that ran fine for a week and all this happened after doing hill decent. Ideas??
Thread Starter
Junior Member
Joined: May 2018
Posts: 2
Likes: 0
From: Las Vegas, NV
I don't think this issue has any relation to the hill decent control since that is its own module but this morning it worked fine at first and then once I drove to work... it was not working again. I think it may be related to my LED headlights I put in but not sure... maybe something got knocked loose. I guess I will be taking all of this apart again to check the connections 
Junior Member
Joined: May 2022
Posts: 15
Likes: 8
From: West Virginia
curious if you ever found a solution to this. I have Alpharex lights that the passenger side went out on (only thing recently was that side was in the body shop getting the fender worked on but don't think they should have done anything to the wiring). so for the life of me can't figure out why it stopped working all of a sudden