Ok is there some thing I'm missing on my other trucks you just put a screwdriver in the adjuster and turn. I tried turning these on this truck and they will not turn almost as if they have a lock on them. Any help would be appreciated.

 

i used an open wrench on they nylon nut just back of the hole - believe it was a 7/16. adjust clcockwise/counter- clockwise as needed.

Alan

 

This is the adjuster I have.

 

Mine is the same. I turned it with an allen wrench, but it didn't do anything

 

I mine want turn the gear on the side acts like it is in a bind and will not turn

 

I did mine just the other day after taking my tow load off to raise them back up. I used a small screwdriver and held it at an angle so it would catch. It works,but it did take me more spins than I thought it would to get them to move how I wanted.

 

Mine acted the same. I got one side to adjust up so they atleast match, whether they are pointed high or not I will see.

 

The ones I have are completely different: