I bought a set of mirrors with 22 pin with Power Fold, Signal, Spot Lamp, puddle lights and auto dimming and heat on drivers side for my 2019 F-150 XLT and I need the wiring harness and modules for them. I had these numbers,

Drivers Mirror - JL3Z-17683-KAPTM
Passenger Mirror - JL3Z-17682-KCPTM

Driver Door Harness - KL3Z-14631-F
Passenger Door Harness - JL3Z-14630-E
Driver side Door Module: DG9Z-14B291-WY
Passenger Side Door Module: DG9Z-14B291-WW

Hoping someone can confirm these are right part numbers.

 

If your 150 is like mine it came with 8 pin connectors. I hope the harnesses fix that. You will need the drivers side controller as well. Worse come to worse I thought about this myself and there are a couple good videos on youtube showing the running wires method of doing this.

 

Thanks ArrJay and yes mine came with 8 pin mirrors but the ones I got to replace them are 22 pin. I just want to make sure the new cables and modules will work.

 

I can't confirm on the KL3Z-14631-F harness as I didn't use that one for mine. Might be a new version as it starts with "K". First part I've seen with a "K". Each revision of a new part that replaces an older version they will follow the alphabet. KL3Z is newer than JL3Z which is newer than HL3Z which is newer than FL3Z and so on. I used the FL3Z-14631-J but I probably would have opted for the part you list if I knew it existed. So I will say that part is good.

The other parts line up with what I had. The only variance is the DG9Z-14B291-WW was replaced with the DG9Z-14B291-XC so if you can't find the WW, the XC will work.

The mirror parts are just which options you want on your mirrors.

I just finished my XLT power folding mirror conversion a few days ago.

 

By any chance did you do a writeup or better yet, a YouTube video of this? I recently started parking my F-150 in the garage but I can't do it unless the mirrors are folded in. I'm really wanting to add power folding mirrors (actually I'd be happy just getting the right side mirror to fold but I don't know if it's possible to do just one.)

Did you buy your mirrors directly from Ford? Any issues with the install?

Thanks in advance!

 

I have a small write up on my build page. The post (starting at #23) should also link to a write up.

Feel free to ask any questions if you gat stumped.

https://www.f150forum.com/f78/czchme...476169/index3/