I just had my truck lowered and leveled. They got it too low for my taste. And the rear bottoms out. They said it's as high as it can go with the kit. I'm going to have them take the kit out if I can't get any higher. Any suggestions?

 

DANG! That's definitely low.

 

What kit, and / or how was it done.

 

I think it would look good with the right rim and tire combo but not the stock setup. The bottoming out would be hard to live with.

 

Belltec 1000SP. 1 to 3 front and 5 1/2 rear.

 

Add a one inch lift hanger in the back. Just finished mine with a 3/4 drop. I used the same Belltech kit in the front with a Maxtrac flip in the rear.

 

^^^^^^ That’s a more appropriate rim for that stance. Are my eyes deceiving me or do you have some pretty strong negative camber going on up front?

 

You are seeing it correct. It’s actually in the parking lot waiting to be aligned.

 

They look good lowered. I also like the look of the Chevy Tahoe Police cruisers since they are lowered and have black wheels.

 

1” lift shackle...problem solved.