2019 Limited rear bumper
04-17-2020, 11:18 AM
#751
Member
Again read the 75 pages of this thread, all the answers are in here. Bumper, brackets, bumper hitch exhaust hangers, driver side tail pipe hanger( same as passenger bracket just flipped) If you have an 18 or older, the holes are probably not on the frame or in the bumper hitch. Sensor harness needs to be replaced or lengthened, guys have used original sensor mounts but trimmed them.
hope that helps
04-17-2020, 12:22 PM
#752
Senior Member
Or maybe Regular cabs don’t have the holes in the frame because they would never be Limited’s or Raptors
04-17-2020, 12:56 PM
#753
Senior Member
My 18 built in winter of 17 did not have the holes. Only late build 18s got them.
The following users liked this post:
OCMike (04-17-2020)
04-17-2020, 04:07 PM
#755
Senior Member
Yes those are the bumper holes for the brackets, there is also the driver side hanger that is the same as passenger, hopefully you have the holes for the nut plates to clip in, they are to the rear of the bracket that has the hoses and wiring that drops down to the rear axle. I had to gently bend this bracket back to get clearance from those wires and brake lines
The following users liked this post:
Danengraham (04-23-2020)
04-23-2020, 08:26 AM
#759
Senior Member
Probably the only place it would exist is aftermarket. The bumper sections are from the highest level trim package Ford makes, with all the technology on the truck, it wouldn’t function without backup sensors. So your options are 1) add rear sensing and the sensors, 2) put “fake” sensors in to fill the holes, 3) have a body shop fill the holes.
The following users liked this post:
Danengraham (04-23-2020)