When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Anyone have part numbers for the following to fit this new bumper on existing f150s:
left and right exhaust hanger
left and right plastic hanger bracket
parking sensor extensions
left and right 2019 limited bumper brackets
i have these two but not sure if they include both the plastic bracket mount and hanger
HL3Z-5260-B & HL3Z-5260-A
Anyone have part numbers for the following to fit this new bumper on existing f150s:
left and right exhaust hanger
left and right plastic hanger bracket
parking sensor extensions
left and right 2019 limited bumper brackets
i have these two but not sure if they include both the plastic bracket mount and hanger
HL3Z-5260-B & HL3Z-5260-A
From the picture here I would guess the hanger is welded to the pipe and cannot be bought separately. I would also think extensions don't exist, it would be whole lot cheaper for Ford to make two different harness and save the the money on 2 extra connectors that also create another connection that could fail.
From the picture here I would guess the hanger is welded to the pipe and cannot be bought separately. I would also think extensions don't exist, it would be whole lot cheaper for Ford to make two different harness and save the the money on 2 extra connectors that also create another connection that could fail.
Mike
hmm does that mean that people who install raptor bumpers cut their sensor wires and solder? is this a photo of a raptor? If so from where?
hmm does that mean that people who install raptor bumpers cut their sensor wires and solder? is this a photo of a raptor? If so from where?
Extending the wires are one option or replacing harness with a Limited or Raptor harness as XLT Shaker mentioned with the correct harness.
No this picture above is from parts.ford.com, using the VIN 1FTEW1EG4KFA18386 for a 2019 Limited.
For the wiring harness the picture below shows them BTW Ford doesn't update the drawings to included the newer front end style,
I think the one we are after is the purple one in the back, and has an MSRP of around $14. Unfortunately parts.ford.com does not display the whole part number.
What I've done in the past is high light the parts I want and email them to Tasca or ANWBL and quote the parts.
Extending the wires are one option or replacing harness with a Limited or Raptor harness as XLT Shaker mentioned with the correct harness.
No this picture above is from parts.ford.com, using the VIN 1FTEW1EG4KFA18386 for a 2019 Limited.
For the wiring harness the picture below shows them BTW Ford doesn't update the drawings to included the newer front end style,
I think the one we are after is the purple one in the back, and has an MSRP of around $14. Unfortunately parts.ford.com does not display the whole part number.
What I've done in the past is high light the parts I want and email them to Tasca or ANWBL and quote the parts.
found this for that part number. looks like it is a raptor part. Now what are the part numbers for those brackets holding the bracket and exhaust hangers. that should be all left that we need. NOW TO THE FUN PART! What exhaust tips/setup we running boys!?!
03-08-2019, 10:10 PM
