Hey,
I’m rebuilding a 2018 Elocker carrier I got used off eBay to replace my open diff in my 2017. All the parts were included with the used Elocker except one of the spider gear pinion thruster washers. The one that was included with the used unit is about twice as thick as the thrust washers in my open diff. I cannot find the part number of this thicker thrust washer from an Elocker setup anywhere on the net. Anyone know what it might be? Or able to send a pic of the parts diagram for the individual elocker components. Also, anyone rebuild one of these and have some pics of these thrust washers so I can confirm they are the correct ones in the Elocker? The only thrust washers I found online are F75Z-4230-AA which are the thinner open diff ones.

Also, if I stack two of the thinner washers they are about the same size as the thicker washer. I did a test on the bench with this setup of the thicker washer and two thinner stacked on the other side and the gears moved, but we’re pretty tight. It moved a lot better with the one thicker and one of the thinner washers on the other spider. Can anyone confirm on a elocker setup are there thick thrust washers on both of the spider gears?

Thanks in advance

 

I have the elocker I swapped out of my 16' when I put in an LSD out in the garage. I'll see if I can get a couple of pictures of the washers for ya after work

 

awesome, thanks so much buddy

 

You never said 9.75" or 8.8". Isn't this the part you need for an 8.8"?

https://www.tascaparts.com/oem-parts...Y2LWdhcw%3D%3D

Or this one for the 9.75"?

https://www.tascaparts.com/oem-parts...Y2LWdhcw%3D%3D

 

sorry, updated title. It’s the 9.75”

 

Shoot, I had not thought of that, mines out of an 8.8 so it's bound to be different