Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by: Worksport

2018 brake controller problem

Thread Tools
 
Search this Thread
 
Old May 25, 2018 | 08:47 PM
  #1  
bluebart1's Avatar
Thread Starter
Junior Member
 
Joined: May 2018
Posts: 1
Likes: 0
Default 2018 brake controller problem

fuse #24 missing
Reply
Old May 26, 2018 | 06:06 AM
  #2  
tmcolegr's Avatar
Size Matters
 
Joined: Aug 2015
Posts: 5,958
Likes: 3,402
Default

SSM 47320 - 2018 F-150 - Genuine Ford Accessory (GFA) Or Aftermarket Trailer Brake Controller (TBC) Installation

Some 2018 F-150 customers may request installation of a GFA or aftermarket TBC. Depending on vehicle configuration the battery junction box (BJB) may not have the necessary fuse and/or terminals to provide power to the TBC. If the BJB has fuse F24 present, proceed with TBC install. If BJB fuse F24 location only has terminals present, use the 30A fuse (GU5Z-14526-H) found in the GFA TBC kit JL3Z-19H332-AA and proceed with the TBC install. If BJB F24 fuse terminals are not present the GFA TBC kit should not be installed. Do not replace the BJB for this condition. Engineering is aware of this concern and is developing a fused jumper harness kit which is expected to be available 3rd quarter of 2018.
Reply
Old May 26, 2018 | 11:35 AM
  #3  
Donjuan2002's Avatar
5 Year Member
5 Year Member
Photogenic
Photoriffic
 
Joined: May 2018
Posts: 251
Likes: 67
From: Cypress, TX
Default

They installed a new battery junction box (fuse box) on my 2018 that was missing F24. I’m glad I got this solution vs the fused harness kit.
Reply




All times are GMT -4. The time now is 01:12 AM.