2016 Transmission
Thread Starter
Junior Member
Joined: Apr 2020
Posts: 2
Likes: 0
2016 Transmission
I just bought a used 2016 F150 3.5EB 4x4 couple months ago. Truck currently has 52,000 miles and my transmission went out last weekend. Luckily the truck is still covered under warranty and i have the extended warranty as well. Got a call from the service department and was told the transmission oil pump went out. Any else run into this problem, i did a search on google and only came across a few post about the 2.7 trucks having oil pump issues.
Very few problems with the 6R80 trannys. Nothing is perfect but IMO this has been a pretty good trans. Very few problems with it especially when compared to the new 10R
Just for fun...
The Ford 6R80 is based on the ZF 6HP26 6 speed automatic transmission. Ford manufactures the transmission under license from ZF at the Livonia Transmission Plant in Livonia, Michigan. The 6R80 is featured in 2009 to present Ford F-150 pickups. It features torque converter lockup capabilities in all 6 gears and an integrated "Tow/Haul" mode for enhanced engine braking and towing performance. For the 2011 model year, the transmission was revised to provide smoother shifts, improved fuel economy, and overall better shift performance. Most notable of the improvements was the addition of a 1 way clutch that provided smoother 1-2 up-shifts and 2-1 down-shifts. The transmission has a relatively low 1st gear and two overdrive gears, the highest of which is 0.69:1. This provides exceptional towing performance when needed, while maximizing fuel economy by offering low engine speeds while cruising.
The 6R80 can be found behind the 3.7L V-6 all the way up to the 6.2L V-8. Ford has stated that while the transmission is used in multiple applications, each transmission is optimized and integrated differently depending on the engine it is mated to. The 6R80 features "Filled for Life" low viscosity synthetic transmission fluid (MERCON LV), though a fluid flush is recommended at 50,000 miles if your truck falls under the classification of "Severe Duty" operation. The transmission, as used in the Ford F-150, has a fluid capacity of 13.1 quarts and weighs 215 lbs
Just for fun...
The Ford 6R80 is based on the ZF 6HP26 6 speed automatic transmission. Ford manufactures the transmission under license from ZF at the Livonia Transmission Plant in Livonia, Michigan. The 6R80 is featured in 2009 to present Ford F-150 pickups. It features torque converter lockup capabilities in all 6 gears and an integrated "Tow/Haul" mode for enhanced engine braking and towing performance. For the 2011 model year, the transmission was revised to provide smoother shifts, improved fuel economy, and overall better shift performance. Most notable of the improvements was the addition of a 1 way clutch that provided smoother 1-2 up-shifts and 2-1 down-shifts. The transmission has a relatively low 1st gear and two overdrive gears, the highest of which is 0.69:1. This provides exceptional towing performance when needed, while maximizing fuel economy by offering low engine speeds while cruising.
The 6R80 can be found behind the 3.7L V-6 all the way up to the 6.2L V-8. Ford has stated that while the transmission is used in multiple applications, each transmission is optimized and integrated differently depending on the engine it is mated to. The 6R80 features "Filled for Life" low viscosity synthetic transmission fluid (MERCON LV), though a fluid flush is recommended at 50,000 miles if your truck falls under the classification of "Severe Duty" operation. The transmission, as used in the Ford F-150, has a fluid capacity of 13.1 quarts and weighs 215 lbs