2016 Super Cab- Inter drivers window auto up function problem
Just picked up my 2016 super cab with 2.7eco loving it but intermittently when i do auto up feature on drivers window it will go up and then go back down or stop half way. Is this been talked about before?
There is a way to retrain it.. So I would follow the instructions for that first.
You have to learn the window travel. Auto up has an anti pinch feature that prevents kids and pets from getting decapitated. Run the window all the way down without pushing the switch past the detent for "auto down", hold the switch for a couple seconds after the window stops. Do the same in the up direction and you should be good to go. The auto close function for the moonroof will have a similar learning procedure. Just teaching the control module the window travel. If a someone gets their hand caught in the window on the way up, it will stop and reverse a few inches
You have to learn the window travel. Auto up has an anti pinch feature that prevents kids and pets from getting decapitated. Run the window all the way down without pushing the switch past the detent for "auto down", hold the switch for a couple seconds after the window stops. Do the same in the up direction and you should be good to go. The auto close function for the moonroof will have a similar learning procedure. Just teaching the control module the window travel. If a someone gets their hand caught in the window on the way up, it will stop and reverse a few inches






