Does anyone know of or has made a T-Harness for the front blinker? Or where to source the male/female plugs to make one? I did the one for parking lights for Paramount Raptor grille, just looking for front blinker to buy or build now.

 

Factory LEDs or Incandescent? Connector is different.

 

Oops, sorry....incandescent

 

I can't help you with a made up "T" but if you want to make your own here are some of the parts you need:

1. The female connector at end of the factory harness is a Molex 33471-0401. The tin plated pins for this are either Molex 33012-2003 or 33012-3003. The different pin part numbers are for how the pins are reeled which isn't an issue since you are not using a automatic crimping machine so either part number can be used. It is available as a Motorcraft WPT-925 (Ford 8U2Z-14S411-TA).
2. The mating male connector is a Molex 31481-4401 and replaces obsolete 31481-0401. Tin plated pins for this are either Molex 33000-0002 or 33000-1002.

Since I don't have the incandescent lights I can't confirm the above information. You can check your harness. The Molex part number will be displayed on the top of the connector where the hump is for the latch.

 

thank you much sir!