2016 F-150 Backup camera problems.
Long story short, my rear view camera needed to be replaced right after picking my new XLT 302a up. Now the parking gridlines/vectors aren't depicting. Went through the manual and Sync 3 and couldn't find anything. Thoughts?
I had the same thing happen to me...I ended up arguing with the service manager about it... he claimed there was only one style camera and it was in the settings and I told him I'm not mentally ill I went through all the settings and there's nothing...turns out I was right there are two styles of cameras and they had to swap them out again
They didn't initialize the camera. Its not just simply replace it.
Installation
All vehicles
To install, reverse the removal procedure.
Vehicles equipped with rear only parking aid camera
Using a diagnostic scan tool, following the on screen instructions for the LIN New Module Initialization-BCM configure the BCM.
Vehicles equipped with 360° cameras only.
Using a diagnostic scan tool, following the on screen instructions for the LIN New Module Initialization-IPMB configure the IPMB.
Align the 360° cameras.
Refer to: 360 Degree View Camera Alignment (413-13B Parking Aid - Vehicles With: Parking Aid Camera, General Procedures).
Vehicles equipped with 360° camera and Pro Trailer Backup Assist™
Using a diagnostic scan tool, following the on screen instructions for the LIN New Module Initialization-IPMB configure the IPMB.
Align the 360° cameras.
Refer to: 360 Degree View Camera Alignment (413-13B Parking Aid - Vehicles With: Parking Aid Camera, General Procedures).
Align the Pro Trailer Backup Assist™ camera system.
Refer to: Pro Trailer Back Up Assist Camera Alignment (413-13D Parking Aid - Vehicles With: Trailer Back Up Assist (TBA), General Procedures).
Vehicles equipped with rear only parking aid camera and Pro Trailer Backup Assist™
Using a diagnostic scan tool, following the on screen instructions for the LIN New Module Initialization-IPMB configure the IPMB.
Align the Pro Trailer Backup Assist™ camera system.
Refer to: Pro Trailer Back Up Assist Camera Alignment (413-13D Parking Aid - Vehicles With: Trailer Back Up Assist (TBA), General Procedures).
Installation
All vehicles
To install, reverse the removal procedure.
Vehicles equipped with rear only parking aid camera
Using a diagnostic scan tool, following the on screen instructions for the LIN New Module Initialization-BCM configure the BCM.
Vehicles equipped with 360° cameras only.
Using a diagnostic scan tool, following the on screen instructions for the LIN New Module Initialization-IPMB configure the IPMB.
Align the 360° cameras.
Refer to: 360 Degree View Camera Alignment (413-13B Parking Aid - Vehicles With: Parking Aid Camera, General Procedures).
Vehicles equipped with 360° camera and Pro Trailer Backup Assist™
Using a diagnostic scan tool, following the on screen instructions for the LIN New Module Initialization-IPMB configure the IPMB.
Align the 360° cameras.
Refer to: 360 Degree View Camera Alignment (413-13B Parking Aid - Vehicles With: Parking Aid Camera, General Procedures).
Align the Pro Trailer Backup Assist™ camera system.
Refer to: Pro Trailer Back Up Assist Camera Alignment (413-13D Parking Aid - Vehicles With: Trailer Back Up Assist (TBA), General Procedures).
Vehicles equipped with rear only parking aid camera and Pro Trailer Backup Assist™
Using a diagnostic scan tool, following the on screen instructions for the LIN New Module Initialization-IPMB configure the IPMB.
Align the Pro Trailer Backup Assist™ camera system.
Refer to: Pro Trailer Back Up Assist Camera Alignment (413-13D Parking Aid - Vehicles With: Trailer Back Up Assist (TBA), General Procedures).






