2015+ Wheel & Tire Fitment Guide
#11
USERNAME: pstolljr
2WD/4WD: 4WD
SUSPENSION FRONT MODS (brand/type): Rancho Quicklift level kit
FRONT LIFT (in): 2.5"
SUSPENSION REAR MODS (brand/type): None. FX4 factory option
REAR LIFT (in): none
TIRE MODEL: Nitto Terra Grappler G2
TIRE SIZE (XXX/XX/RXX): 295/70/R18
TIRE DIMENSIONS (in x in): 34.3" x 11.7"
WHEEL MODEL: Ford stock 18" Sport model
WHEEL SIZE (in x in): 18" x 7.5"
OFFSET (mm): unknown
RUBBING?: None
TRIMMING?: None
NOTES: I added 1.5" FG Wheel adapters (spacers) and still no rubbing or trimming.
PICTURES:
Last edited by pstolljr; 05-09-2017 at 03:27 PM.
The following 5 users liked this post by pstolljr:
ABF150Fan (11-09-2020),
GeneralPurpose7.62 (06-29-2021),
j.digiacomo (05-09-2017),
RN2013 (01-31-2018),
wesshipman (12-04-2018)
#14
USERNAME: pstolljr
2WD/4WD: 4WD
SUSPENSION FRONT MODS (brand/type): Rancho Quicklift level kit
FRONT LIFT (in): 2.5"
SUSPENSION REAR MODS (brand/type): None. FX4 factory option
REAR LIFT (in): none
TIRE MODEL: Nitto Terra Grappler G2
TIRE SIZE (XXX/XX/RXX): 295/70/R18
TIRE DIMENSIONS (in x in): 34.3" x 11.7"
WHEEL MODEL: Ford stock 18" Sport model
WHEEL SIZE (in x in): 18" x 7.5"
OFFSET (mm): unknown
RUBBING?: None
TRIMMING?: None
NOTES: I added 1.5" FG Wheel adapters (spacers) and still no rubbing or trimming.
PICTURES:
#15
All of the photos were taken after the wheel spacers were installed. I've only had them on a few days, but, the ride is not any different imo. I had the alignment redone after the spacers were installed. I'll try to get some decent pics of the entire truck later.
#16
Senior Member
USERNAME: carrierj
2WD/4WD: 4WD/FX4
SUSPENSION FRONT MODS (brand/type): none yet
FRONT LIFT (in): 1.5" Autospring level spacer
SUSPENSION REAR MODS (brand/type): Fox 2.0 shocks, Hellwig ASB
REAR LIFT (in): Stock
TIRE MODEL: Nitto Terra Grapplers G2
TIRE SIZE (XXX/XX/RXX): 285/65/20
TIRE DIMENSIONS (in x in): 11.22" tread/34.58" diameter
WHEEL MODEL: Stock PVD chrome
WHEEL SIZE (in x in): 20"
OFFSET (mm): Added BORA spacers 1.5"F/1.25"R
RUBBING?: Slight crash bar rubbing after adding BORA spacers
TRIMMING?: minimal trimming of front wheel well rear corner, spread crash bars open 1.5"
NOTES:
PICTURES:
2WD/4WD: 4WD/FX4
SUSPENSION FRONT MODS (brand/type): none yet
FRONT LIFT (in): 1.5" Autospring level spacer
SUSPENSION REAR MODS (brand/type): Fox 2.0 shocks, Hellwig ASB
REAR LIFT (in): Stock
TIRE MODEL: Nitto Terra Grapplers G2
TIRE SIZE (XXX/XX/RXX): 285/65/20
TIRE DIMENSIONS (in x in): 11.22" tread/34.58" diameter
WHEEL MODEL: Stock PVD chrome
WHEEL SIZE (in x in): 20"
OFFSET (mm): Added BORA spacers 1.5"F/1.25"R
RUBBING?: Slight crash bar rubbing after adding BORA spacers
TRIMMING?: minimal trimming of front wheel well rear corner, spread crash bars open 1.5"
NOTES:
PICTURES:
#18
Senior Member
Alright y'all, the 2009-2014 group has one of these... 500 pages strong. I think it's about time we did too. There are enough guys on here to grab some really relevant data points about what is fitting on our trucks; seeing as there are thousands of combinations possible. Crash bars and offset seem to be a new challenge, and we've got countless threads about them. Please provide the following information about your personal setups, and I will compile a living spreadsheet to keep on this post for folks to access when trying to make wheel/tire choices.
Please COPY & PASTE the following into your response, and provide the relevant info:
I will do my best to keep up with you all, but keep the info rolling in!! I popped my stock info and a few examples from various threads in the attachment as an example. Thanks in advance, and let me know if there's anything else we should capture.
J
ATTACHMENT:
Please COPY & PASTE the following into your response, and provide the relevant info:
USERNAME:
2WD/4WD:
SUSPENSION FRONT MODS (brand/type):
FRONT LIFT (in):
SUSPENSION REAR MODS (brand/type):
REAR LIFT (in):
TIRE MODEL:
TIRE SIZE (XXX/XX/RXX):
TIRE DIMENSIONS (in x in):
WHEEL MODEL:
WHEEL SIZE (in x in):
OFFSET (mm):
RUBBING?:
TRIMMING?:
NOTES:
PICTURES:
Useful link when completing - https://tiresize.com/wheel-offset-calculator/2WD/4WD:
SUSPENSION FRONT MODS (brand/type):
FRONT LIFT (in):
SUSPENSION REAR MODS (brand/type):
REAR LIFT (in):
TIRE MODEL:
TIRE SIZE (XXX/XX/RXX):
TIRE DIMENSIONS (in x in):
WHEEL MODEL:
WHEEL SIZE (in x in):
OFFSET (mm):
RUBBING?:
TRIMMING?:
NOTES:
PICTURES:
I will do my best to keep up with you all, but keep the info rolling in!! I popped my stock info and a few examples from various threads in the attachment as an example. Thanks in advance, and let me know if there's anything else we should capture.
J
ATTACHMENT:
#19
Senior Member
Thread Starter
i thought about it, but i dont want it linked to my account. are folks able to see it OK as is? it's an excel document that can be filtered as needed.
carrierj added.
carrierj added.
The following users liked this post:
carrierj (05-10-2017)
#20
Senior Member
Check with the moderators on this. I think when Livnitup started the FORScan thread, after so many days he was not able to edit the OP and update the spreadsheet file. They can grant rights or something to do it. He uses google docs also.