Hello,

I just got some BOSS Coilovers installed but the rake is too much. About 1". I wanted to rack it up about 1/2 inch or so. I have no experience adjusting car suspension. I do have the spanner.

Does anyone know how easy/difficult it is to pop the tire off and spanner up the coilovers on this truck?

Thanks!

 

Plenty of people have done this with their coilovers. Just jack the truck up and put jack stands under it so you have the weight taken off the coilovers. You shouldn't have to take your tire off, unless you want to for clearance. Just make sure you mark 1 hole and record how much you turned it so you can match the other ide. Just an idea, but set the e-brake and/or chock the back tires so it won't roll on you when you're jacking it up.

 

This is how I adjusted my Kings. Keep in mind the springs on these trucks are ~700lbs, so it takes some effort to turn the adjusters.