hello to all ... i am new here ... this is my first post... i just bought a used supercharger form ebay .. it came off a 2003 5.4 (10k miles) ... it came with intake , injectors , wiring harns , t/b ,and superchager, (everthing from the lower intake up)... i want to put it on my 2001 harley davidson 5.4 (non-supercharged) im thinking im going to need a computer from a supercharged truck .. am i right and what kind of other problems am i going to run into .. anyone here know?

 

Will this be a Harley or Lightning take off , that is the Eaton?
If so, you can use your pcm with custom tuning.

 

You are going to need about an other 2K worth of accessories. Click on this site for a list of what you are missing. http://www.madenterprise.com/catalog/F150.asp



.

 

thanks alot TheJMC , thats goiong to make my job alot easier .. i will post some pics and let you know how it turns out ....

 

Here's the short list.........

Bracket with idlers and special bolts
Tensioner Assembly
Lightning Alternator
Alternator Stabilizer Bracket
Intercooler Pump with Bracket and Pigtail
Intercooler Reservoir with Cap
IAC Tube
Throttle Cable
Throttle Cable Bracket
Cruise Control Cable
IAT Sensor (fits in air cleaner)
Lightning Water Pump (or suitable substitute)
PCV Tube (left hand side)
TB to MAF Rubber Connector with clamps
90mm MAF
Intake Gasket Set
In-Tank Fuel Pump
Upper Radiator Hose
Upper Two Intercooler Hoses
Original Equipment Installation Bolts
Drive Pulley with Belt
http://www.madenterprise.com/catalog/F150.asp