In the wiring harness there is a connector for the break pressure switch
colors are green/red black/yellow (Haynes manual says red/white white/pink)

Am showing a positive going from the fuse to the switch
then from the switch to the cruse control.
If the cruse control is removed does this connector serve
any other purpose?

 

Wish I could help you, since they made the F150 for so many years with cruise control, and many more years with brake light switches, it is impossible for someone to help you with out knowing year and trim level. Looking in your avatar you have hybrid in there so there is no telling what else you have changed.

 

If its the same connector as in the recall, it can be left off or removed with no harm to other circuits. Drove my truck 18 months as directed by recall waiting for parts availabiltiy.

 

I thank you very much NGM and Good old Bill,
And yes Good old Bill its a 95 F-150 with the recall
I will prolly remove both connectors then I do not use the
cruse control even tho I never disconnected it it will be now.