The 15 amp fuse in my underdash fuse box did not appear to be burnt out, however, when my turn signals quit working but not my hazrds, I changed it out, and they worked....for about a day. I put in a new fuse again and they worked for another day. Now they will not work, even with a new fuse. My hazards work just fine. None of my bulbs are out. When I move the turn signal switch up and down, the lamps go on and off, and this is what I have been having to do when I make a turn.

Sometimes, though, when the brake pedal is depressed and the brake lights come on, the rear driver's turn signal bulb flickers when I put the switch down instead of just staying on.

It's a '94, 2 wheel drive. Any ideas what's wrong or how to fix it?

Thanks in advance!

 

Replace the turn signal flasher. They can do that sometimes.

 

Do you mean the big round fuse or the light bulb? Thanks!

 

He means the round flasher unit. Should be on the lower right side of the fuse block

 

Yup

 

Thank you both very much!

 

Turn signals working now. Thanks again