Suggestions Wanted

Sometime in the near future I want to start building a 5.0L for my 1993 F150 XL Manual Trans.

Will this Smog Pump Delete Kit work with the factor accessory brackets?
http://www.latemodelrestoration.com/...ump-Eliminator

I also want the GT40 or GT40P Explorer Heads, the Explorer heads are not Smog Compatible. Either way I want to delete the Smog pump and retain the standard belt

Other things on the wishlist are:

Trick Flow Street Heat intake
65mm Throttle Body
not sure on Injector size
Comp Cams 280H
Headers

 

Ok Lets try this again. Has anyone ever installed this smog pump delete kit
http://www.latemodelrestoration.com/...ump-Eliminator
or anything similar. Do you know if it is compatible with my engine.

 

Just get a smaller belt. That's what I did when I took off the smog. Are you using an underdrive fully kit, if so that's a whole other ball game.

 

yeah it will fit, but this one is cheaper.
http://www.summitracing.com/parts/PRO-68110/

 

I tried the aluminum smog eliminator pulley i had to file off a lil bit of one of the corners and now i have to get a lil bit shorter belt but thats only like 20-30 Bucks so if you dont care then go for it. Just make sure you take out you cat other wise it will clog. And it wont run properly.