Okay when i got the truck, the right turn signal worked fine but when using the left turn signal I would have to hold the arm down. Removed the steering wheel and found the cam was broken so I replaced the t/s switch. Problem solved right? Except now neither turn signal turns off after completing a turn. I have to manually flip the arm back to center position.

Also,when I got the truck, nothing would work with the key in the accessory position. No big deal. Couple of nights ago I go to start the truck and the key would not return from the start position to the run position. Unless I started the truck and then quickly turned the key back a little to the run position my volts would drop to zero and she would die. Since I was about to change the turn signal switch it seemed like a good time to put in a new key switch. I did and I no longer have the voltage drop but the switch will still stay in the start position unless I turn it back and the accessories still do not work with the key in the accessory position.

Any ideas?