I'm converting a 1992 2 wheel drive to a four wheel drive. The problem I've ran into is the donor transmission I bought is set up for a manual clutch but the truck originally came with a hydraulic clutch. Is there an adapter kit out there to retro fit the clutch cylinder onto the bell housing? Would fabricating a bracket work or be even a good idea? any suggestions would be appreciated. Thanks!

 

No, but if you find an earlier non hyd truck you might find the stuff to do it. The only problem might be the pedal and how the linkage mounts. You might want to look into a racing hydraulic t\o bearing, it converts man into hyd clutch, also there is no provision on the bell housing for a clutch fork.