Solid “hydraulic” type motor mounts?
Thread Starter
Junior Member
Joined: Dec 2014
Posts: 21
Likes: 3
From: Bozeman, MT
Solid “hydraulic” type motor mounts?
Howdy y’all,
Has anyone had experience with these solid ‘best replacements’ for the not-all-that-resilient hydraulic type mounts?
I have a ‘94 F150 with the 300 that uses these rarely spec’d mounts and it seems like the hydraulic NAPA replacements I installed two years ago are crapping the proverbial bed.
link : https://www.npdlink.com/product/insu...t-solid/209940
I appreciate any wisdom you have to share, maybe someday when I pull the motor I’ll change the brackets to the standard style, but hopefully these solid units could be the ticket for a while. Thanks!
Has anyone had experience with these solid ‘best replacements’ for the not-all-that-resilient hydraulic type mounts?
I have a ‘94 F150 with the 300 that uses these rarely spec’d mounts and it seems like the hydraulic NAPA replacements I installed two years ago are crapping the proverbial bed.
link : https://www.npdlink.com/product/insu...t-solid/209940
I appreciate any wisdom you have to share, maybe someday when I pull the motor I’ll change the brackets to the standard style, but hopefully these solid units could be the ticket for a while. Thanks!
Senior Member
Joined: Oct 2016
Posts: 3,700
Likes: 766
From: Parts Unknown
I once changed a busted hydraulic mount with a solid rubber one very similiar to yours on a T-Bird. It worked and lasted a longer time. The only drawback was some additional engine vibrations were felt. IF they are still available, try to get OEM mounts and stay away from Anchor mounts.