Sixliter Tune Up
#1
Senior Member
Thread Starter
Sixliter Tune Up
has anyone done or heard of a Sixliter tune to 5.0/5.8
been reading up on this a guy from a different forums.
seems like a lot of people have done it.
wondering if anyone here has done it. im tempted to do it.
been reading up on this a guy from a different forums.
seems like a lot of people have done it.
wondering if anyone here has done it. im tempted to do it.
#3
Dodge+Ford = always ready
iv done it to my 5.0 and my 7.5. its a great little trick to gain a lil more power and fuel economy.
Last edited by f150cam; 12-29-2012 at 11:00 PM.
#5
Dodge+Ford = always ready
do you mean numbers for the parts or just what i switched,
i did:
coil
cap & rotor
plugs
and wires
then bumped timing to 13
that was on both trucks, it will take me a while if you need part numbers, but you can go to your local parts store and have them order you MSD cap, rotor and coil for your truck, get normal autolight copper plugs, nothing special. and some i believe 9mm wires.
i did:
coil
cap & rotor
plugs
and wires
then bumped timing to 13
that was on both trucks, it will take me a while if you need part numbers, but you can go to your local parts store and have them order you MSD cap, rotor and coil for your truck, get normal autolight copper plugs, nothing special. and some i believe 9mm wires.
#7
lost my Car again...
i havn't done it yet! damn it! haha I do want to though just never found the step by step plus I have the 4.9l Im guessing its just the same for the I6 the timing still 13 degrees and is that advancing or retarding?
Trending Topics
#9
lost my Car again...
well my trucks got just 120k on it lol but its just as simple as advancing the timing 12degress? and just swap out the coil cap rotor and wires? why the hell didn't i do this before!
#10
Senior Member
Thread Starter
No I meant what brands but yeah msd seems the most used.
I'm going with 8.2mm wires and msd 48k coil cap and rotor.
For my 5.8. But I also need a new distributor because the clips are broken
I'm going with 8.2mm wires and msd 48k coil cap and rotor.
For my 5.8. But I also need a new distributor because the clips are broken