When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've got 32x11.5x15 on factory 7.5 wide alcoa rims and I don't have any issues, other than a light rubbing on the radius arm at full lock - with a little more offset wheel it would probably be eliminated, though then you might have to space the bumper out a little bit. I have Moog cc824 coils up front and F250 leafs in the rear, so it is about 1-1.5" higher than stock height for both.
Running boards are gone and now it new wheel/tire time!!!
Slowjoe24 let me know what offset and how wide of a rim you are going with. Also if there are rubbing issues. I was planning on going with 16x8s but couldn't find something that I liked that wouldn't rub !
Slowjoe24 let me know what offset and how wide of a rim you are going with. Also if there are rubbing issues. I was planning on going with 16x8s but couldn't find something that I liked that wouldn't rub !
Update!!! Rollin on 18x9's Worx wheels with 285/65/18 BFG's also used the Rough Country 1.5" leveling springs in the front........no rubbing issues so far!!
06-11-2018, 12:38 PM
