Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.

replacing blower motor

Thread Tools
 
Search this Thread
 
Old Jan 15, 2009 | 04:28 PM
  #1  
Mikescan199's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2009
Posts: 6
Likes: 0
Default replacing blower motor

I have a 93 F150 and need to replace the blower motor. It is rattling real bad. Any way to do this without removing dash? I thank everyone for their help and it works fine now. The issue now is it only runs on high. Did I do something wrong?

Last edited by Mikescan199; Jan 16, 2009 at 03:14 PM. Reason: New problem
Reply
Old Jan 15, 2009 | 05:19 PM
  #2  
DixieDarkhorse's Avatar
Senior Member
 
Joined: Dec 2008
Posts: 710
Likes: 1
From: North Carolina
Default

the blower motor is in the engine bay if i'm not mistaken.
Reply
Old Jan 15, 2009 | 09:15 PM
  #3  
dewman's Avatar
No Pain, No Pain!
 
Joined: Jul 2007
Posts: 4,825
Likes: 12
From: Baltimore, Maryland
Default

Originally Posted by Mikescan199
I have a 93 F150 and need to replace the blower motor. It is rattling real bad. Any way to do this without removing dash?
The blower motor is accessible from the engine compartment. It is located on the passenger side firewall. Purchase a Chilton or Haynes repair manual, it is well worth the $20.
Reply
Old Jan 20, 2009 | 02:26 PM
  #4  
Mikescan199's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2009
Posts: 6
Likes: 0
Default Fan switch

I just replaced the blower motor on my heater. The issue now is it only runs on high. Did I do something wrong?[/quote] Thanks in advance for your help. Mike
Reply
Old Jan 20, 2009 | 02:59 PM
  #5  
Good old Bill's Avatar
Senior Member
 
Joined: Feb 2008
Posts: 4,658
Likes: 28
From: Henderson, NV.
Default

There is a blower motor resistor, used to drop voltage for the lower speeds, power is bypassed to got to high. My 02 has the motor in the heater box and the resistor is next to it. If your is like that, perhaps the connector has come loose.
Reply
Old Jan 21, 2009 | 09:05 AM
  #6  
Mikescan199's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2009
Posts: 6
Likes: 0
Default

thanks, I will try it. Mike
Reply




All times are GMT -4. The time now is 09:45 AM.