so im in the process of replacing the fuel pump. but one of the quick release lines is stuck on the sending unit. you can llook in and see 2 of the fingers bent flat against the flange on the sending unit.. anyone have any ideas how to get the line off

 

If disconnecting tool doesn't help - try to remove the locking ring with a tiny screwdriver.

 

If you have a set of picks you can get in there and move the bent ones. I went crazy with mine till I bought the good disconnect tool. Came off so quick I was actually mad I fought with it for so long before. It's the yellow anodized one that's like 15 bucks.