Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.

NEED HELP!!!!!asap PLEEEEASE

Thread Tools
 
Search this Thread
 
Old Oct 4, 2009 | 07:19 PM
  #1  
Liftedford's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2009
Posts: 24
Likes: 0
From: TACOMA, WASHINGTON
Unhappy NEED HELP!!!!!asap PLEEEEASE

im new to f150forum.com and i just recently bought a lifted 93 f150 and the other night i was pullen out and all of a sudden there was a loud repeated clunk comen from the rear end so i got it to where i can park it and the next morning looked at it and when i pulled away you could see the whole rear end move a good inch or so and go back into place and did that repeatedly i checked the u-joints and they are fine...nothen that i could see looked bad...and today i showed my dad and as soon as i put it in gear the whole rear end did the same big rough clunk...its kinda hard to explain but if anyone can help me out anything helps thanks i need back on road asap
Reply
Old Oct 4, 2009 | 07:23 PM
  #2  
Ryan324's Avatar
good ol Arizona boy
 
Joined: Jun 2009
Posts: 738
Likes: 0
From: Arizona
Default

the rear end is bad, my 95 did that, then it made it a half a mile like that and the rear end blew, I had to use 4x4 to get it off the road.
Reply
Old Oct 4, 2009 | 07:28 PM
  #3  
Good old Bill's Avatar
Senior Member
 
Joined: Feb 2008
Posts: 4,658
Likes: 28
From: Henderson, NV.
Default

The rear end where the driveshaft connects went up and down of the whole rear end moved back and forth in its mounting to the springs?
Reply
Old Oct 4, 2009 | 07:39 PM
  #4  
Liftedford's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2009
Posts: 24
Likes: 0
From: TACOMA, WASHINGTON
Default

thanks so wat do i have to do to fix this problem and about how much will it cost
Reply
Old Oct 5, 2009 | 12:16 AM
  #5  
mitchalvin's Avatar
Senior Member
 
Joined: Jan 2008
Posts: 1,254
Likes: 4
From: Pablo MT
Default

Depends on if it is the spring hangers, the u-bolts, broken springs, or the axle itself. The spring hangers, U-bolts, and springs are fairly easy to replace, the axle housing is simple but will cost more.
Reply




All times are GMT -4. The time now is 11:50 PM.