Msd ignition
Thread Starter
Member
Joined: Dec 2011
Posts: 89
Likes: 1
From: Birmingham, Alabama
Msd ignition
Does anyone have a f159 close to 95 with a msd 6 series ignition pack on it? I'm intrested in getting one but I can't figure out how I would wore it up. I couldn't find a diagram on their website either
Senior Member
Joined: Dec 2011
Posts: 1,838
Likes: 41
From: Nova scotia
Thats it, i called the tech line and they told me how.
If you don t wan to buy that harness from them, it goes like this
Tap it into the two coil wires,
Coil positive to small red wire on the msd
Coil negative to the white wire on the box.
Big red and big black wire to the battery,
Small orange wire coming out of the msd to positive on the coil.
Small black wire to to coil negative.
The instruction book that comes with the box explains it pretty good, your stock tach should work with that set up, an after market tach, try teeing it into the white wire , it should work and saves buying a tach adaptor.
If you don t wan to buy that harness from them, it goes like this
Tap it into the two coil wires,
Coil positive to small red wire on the msd
Coil negative to the white wire on the box.
Big red and big black wire to the battery,
Small orange wire coming out of the msd to positive on the coil.
Small black wire to to coil negative.
The instruction book that comes with the box explains it pretty good, your stock tach should work with that set up, an after market tach, try teeing it into the white wire , it should work and saves buying a tach adaptor.