hi I'm about to attempt to lift my 1990 f150 custom 6 inline by installing a 3 inch body lift that i recently bought from performance accessories. my main concern is how i am going to extend my steering column. the kit came with a small rod about 3 inches long but i don't see how my current (i think stock) steering shaft would accommodate this. any help is appreciated. thanks.

 

Put the spacer in and youll be fine thats the easiest part of the lift haha

 

Under your dash there's a joint in the steering rod. Take the one bolt out and put the new joint in. Then connect the rest of the rod to the other end of the new joint.

 

oh alright! thanks a lot for the replies guys. happy fourth!

 

If you need a pic i you cant find it let us know

 

ok so looking up at my steering column underneath the dash i still can't find any joint. again any advice is appreciated. and pics would be great th25. thanks

 

Ill try to remember to grab one 2maro

 

You can't find thAt!? Your lucky I'm still lighting fireworks off or I wouldn't have got these for ya...

 

dont forget about your lower radiator hose, it is going to hit the engine.

 

It is under ur hood on the steering shaft not under the dash..
Be sure to check all clearances including radiator shroud cause I had to trim the lower portion due to mine sagging for some reason after the bl when it was on it..