Key fob programming
Can I program my 95' f150 to respond to signals from my '99 Taurus key fob? Carrying around both is a PITA.
I've tried the ignition on 8 times procedure, but getting no response from the truck. Thanks.
I've tried the ignition on 8 times procedure, but getting no response from the truck. Thanks.
Check the FCC #'s on back of the fobs. If they match you can program it. Under the dash just to the right of the column, you'll see a gray two prong plug.
1.Turn the key forward to the on position.
2.Jump the prongs with wire or paper clip (the door locks should cycle.)
3.Hold unlock button down on fob. If the truck responds, the door locks will cycle again. (Should only take a couple seconds.) If it doesn't, the fob doesn't match the system. Hope this helps. I did mine on my 95 about a month ago.
I don't get stuck. I just lose traction and stop moving!
Sent from my Droid using F150 Forum
1.Turn the key forward to the on position.
2.Jump the prongs with wire or paper clip (the door locks should cycle.)
3.Hold unlock button down on fob. If the truck responds, the door locks will cycle again. (Should only take a couple seconds.) If it doesn't, the fob doesn't match the system. Hope this helps. I did mine on my 95 about a month ago.
I don't get stuck. I just lose traction and stop moving!
Sent from my Droid using F150 Forum





