Injector hunt
#1
1996 302 5.0 Eddie Bauer
Thread Starter
Injector hunt
I am in the hunt for injectors for my rebuilt 96’ 5.0. What cars and trucks have the 19lb 4 hole injectors? My local junkyard is fresh out of 92 to 96 F150s.
#2
Here is a chart that might be useful.
You have used ones, why not get new ones?
Look for OEM Ford injectors on Ebay and shop around
I goy 6 for my 4.2 for 140
That said, most of the ones at the junkyard are just fine and I use them for testing
When testing about half the time, after the miss is gone and I have verified the injector was the problem, I just leave the junkyard one in there and give my customer a break.
You have used ones, why not get new ones?
Look for OEM Ford injectors on Ebay and shop around
I goy 6 for my 4.2 for 140
That said, most of the ones at the junkyard are just fine and I use them for testing
When testing about half the time, after the miss is gone and I have verified the injector was the problem, I just leave the junkyard one in there and give my customer a break.
The following users liked this post:
Jtsarby (06-23-2023)
#3
I can say first hand that 96 Cougar 5.0 (if I remember correctly) uses part F4SE-A1B. These are the all-orange, slim-body, 19 pound style with four holes.
And the 97 Tbird, 4.6L uses part F6VE-A5A. These are the all-orange, slim-body, 19 pound style with four holes.
But anything with the engines in that chart should also provide a set.
And the 97 Tbird, 4.6L uses part F6VE-A5A. These are the all-orange, slim-body, 19 pound style with four holes.
But anything with the engines in that chart should also provide a set.
The following users liked this post:
Jtsarby (06-25-2023)