Hockey Puck Lift
#31
What about if you cut the pipe to about 2.25" and the pucks total hieght is 3"??? That would provide good support and still keep the pressure on the pucks wouldnt it??? And how hard do you wheel?? When i wheel its basically puddle jumping on the trails on the air force base. Rarely flex out, but there are alot of nice hills to climb and ditches to drive through.
#32
broke white boy
i'm hard on my truck, lol the first time out after building it i wanted to go down one trail and the only way to get down it was to drag a tree down the side off the body, tore my mirror off and damn dear ripped my gas door off. dents dont matter to me. battle scars are what i call them lol and thats not an oil leak is sweat for all the horsepower. lol
i've had it out twice and i've beat in the drivers side body, sheared off the 4 X 1/2 inch grade 8 bolts that hold my transfercase skidplate on. ripped OFF my front bumper, and broke the 2 front core support bolts
reved it so high i had a push rod fall off the rocker and bent another one. oh and tore off the drivers side mirror.
i've had it out twice and i've beat in the drivers side body, sheared off the 4 X 1/2 inch grade 8 bolts that hold my transfercase skidplate on. ripped OFF my front bumper, and broke the 2 front core support bolts
reved it so high i had a push rod fall off the rocker and bent another one. oh and tore off the drivers side mirror.
#34
broke white boy
i built mine to play, but it is also my DD too. but i could care less what it looks like going down the road, at least its going lol. i've got another truck sitting out back for body parts if mine get to bad.
#35
Wow man. Im only 18. And i worked 65 hour weeks last summer to buy my truck. Im working the same hours now so i can spruce it up. My ultimate vision of it is just a hardcore survival capable truck. But ive always wanted to buy a jeep or zuk or something to use like you use your truck.
#36
Senior Member
Originally Posted by fordtrucknut
the factory bolts are like a 7/16 thread, and the nut is built into the washer on the bottom. when i did mine which is 2 inch lift my first time out i snapped BOTH front core support bolts and they were grade 8 bolts. i took all them out and and replaced them with 1/2 hardware. and i still check them after every wheeling trip.
Last edited by Warlockk; 07-28-2011 at 02:58 PM.
#37
broke white boy
mine is a survival truck too. it is built to go just about anywhere and haul what i need, i've got a portable cutting torch in the tool box, more tools in there than most guys garage. lol i'm waiting for my clutch to come in for my york compressor then im installing an on board air system with a 5 gal tank in the bedside.
#39
Correction of something that was said incorrectly
Ya, did a quick search on the interwebs.... http://www.youtube.com/watch?v=V7ejhn1EMOQ
Would mind doing this to the front of my 4x2 Cheap leveling kit! lol.
Would mind doing this to the front of my 4x2 Cheap leveling kit! lol.