Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.

HELP!!!!!! Engine wont run

Thread Tools
 
Search this Thread
 
Old Jun 26, 2012 | 08:16 PM
  #1  
Vol150's Avatar
Thread Starter
Vol150
 
Joined: Mar 2012
Posts: 16
Likes: 0
From: Memphis
Default HELP!!!!!! Engine wont run

Have a 96 302 in great condition, 32pounds of fuel pressure at the fuel rail, spark plugs are firing....will run on carb cleaner just not on it's own, any sensors I need to check?
Reply
Old Jun 26, 2012 | 08:54 PM
  #2  
Welder7018's Avatar
Okie.
 
Joined: Nov 2010
Posts: 14,908
Likes: 42
From: Woodward, Oklahoma
Default

The injectors spraying fuel into the engine?
Reply
Old Jun 26, 2012 | 09:02 PM
  #3  
Warlockk's Avatar
Senior Member
 
Joined: Aug 2010
Posts: 2,669
Likes: 116
From: Long Beach, CA
Default

Check for codes. I need a hot key on my phone to send that message automatically.
Reply
Old Jun 26, 2012 | 09:40 PM
  #4  
Good old Bill's Avatar
Senior Member
 
Joined: Feb 2008
Posts: 4,658
Likes: 28
From: Henderson, NV.
Default

My 96 Explorer 302 uses a camshaft position sensor to inform the computor to fire injectors. It is located where the distributor used to be located, a special tool is required to mess with this thing. Bottom line, all said and done, its not that bad of a job.
Reply
Old Jun 26, 2012 | 09:41 PM
  #5  
TylerF150's Avatar
Senior Member
 
Joined: Sep 2011
Posts: 364
Likes: 6
Default

I had a buddy with a 86 f150 with the 302, and he had the exact same symptoms and would run on carb cleaner, and it was the fuel pump
Reply
Old Jun 26, 2012 | 11:57 PM
  #6  
Nitehawkjr's Avatar
Senior Member
 
Joined: Aug 2010
Posts: 959
Likes: 30
From: Belmont, Ms
Default

Fuel pressure should be 35-45 psi
Reply




All times are GMT -4. The time now is 05:39 PM.