Hard shift and jumpy speedo - 94 E4OD
Ford reman transmission.
My 94 4x4
This truck had sat for some time.
Speedometer is jumpy at higher speeds and I sometimes had a hard 1-2 shift and engagement. It was frequent but not constant.
After some research I changed the sensor in the rear axle. That was a few days ago but it still did it.
Yesterday and today it's all just fine. I also bought a "Speed Sensor" from AZ but I literally cannot find one on trans or transfer case.
Only other difference is it's rainy and humid.
A speedometer video I found said to change the sensor in the axle was why I started there.
Did the computer just take a little while to reset?
Not code lights either.
My 94 4x4
This truck had sat for some time.
Speedometer is jumpy at higher speeds and I sometimes had a hard 1-2 shift and engagement. It was frequent but not constant.
After some research I changed the sensor in the rear axle. That was a few days ago but it still did it.
Yesterday and today it's all just fine. I also bought a "Speed Sensor" from AZ but I literally cannot find one on trans or transfer case.
Only other difference is it's rainy and humid.
A speedometer video I found said to change the sensor in the axle was why I started there.
Did the computer just take a little while to reset?
Not code lights either.
Stop changing parts. Return both - they're not doing you any good. Stay out of the zone - their parts are garbage anyway. Click these & read the captions:

(phone app link)

(phone app link)
Is the cruise working normally?
(phone app link)
(phone app link)
Is the cruise working normally?
Ford reman transmission.
My 94 4x4
This truck had sat for some time.
Speedometer is jumpy at higher speeds and I sometimes had a hard 1-2 shift and engagement. It was frequent but not constant.
After some research I changed the sensor in the rear axle. That was a few days ago but it still did it.
Yesterday and today it's all just fine. I also bought a "Speed Sensor" from AZ but I literally cannot find one on trans or transfer case.
Only other difference is it's rainy and humid.
A speedometer video I found said to change the sensor in the axle was why I started there.
Did the computer just take a little while to reset?
Not code lights either.
My 94 4x4
This truck had sat for some time.
Speedometer is jumpy at higher speeds and I sometimes had a hard 1-2 shift and engagement. It was frequent but not constant.
After some research I changed the sensor in the rear axle. That was a few days ago but it still did it.
Yesterday and today it's all just fine. I also bought a "Speed Sensor" from AZ but I literally cannot find one on trans or transfer case.
Only other difference is it's rainy and humid.
A speedometer video I found said to change the sensor in the axle was why I started there.
Did the computer just take a little while to reset?
Not code lights either.








