I have a 94 and a buddy broke my flip window latch off. He broke the shaft it mounts on. I have a parts rig out back I was just curious how you remove the whole flip window from the door. I see that there's 2 screws in the front of the door post I assume I remove these and twist the window and frame out? Anyone know? Thanks in advance.

 

i removed one a while ago (on an old truck, it probably has improved by now) where the wingwindow came out after the roll-down was removed. and there were more screws down lower. it brought the window track with it to, to end up in a P-shape. but that was like a 74 or something.

 

My wingwindow is broke to and i have to replace it and I was looking at it and it seems that there a rivet that comes out and then just have to work its way out after the screws are out.

Good Luck

 

I tried to drill a hole all the way through so I could bolt the latch back on... well I broke the damn window by pulling on it so now I will have to replace the whole thing... If I didnt like the kid that broke the latch id probably have to rough him up lol

 

well an update on the flip window, put the window down, remove the door panel, take the 2 screws out of the front of the door frame, take the bolt out that bolts the window track in, twist the window track and flip window out and thats that... the 92-96 flip window is square in the front, the 86 one I used had a different track and it also uses a differnet window it will fit without a problem but just inst the same. Also the window tracks are different between power and manual crank windows. It wasnt that bad of a deal really any questions feel free to ask lol. Thanks for the input guys.

 

you have to take the door skin off, then take out all the screws that hold it onto the door. you then have to wiggle out your actuall window first, and once that is out the pillar should come right out.